24/7 emergency AC repair across Greater Austin · Demo website by Md. Mitaur Rahman
Signs of a heating problem
Call us if your heating system does this
- No heat at all, or cold air from the vents
- The furnace clicks but does not light
- A heat pump is stuck in defrost or covered in ice
- Burning or musty smell that does not go away
- The system runs constantly but the house stays cold
- A carbon monoxide alarm goes off (leave the home and call 911 first)
What’s included
Safe, thorough heating repair
Heating work involves gas and high voltage, so we follow the same safety checks on every call.
Furnace repair
Ignitors, flame sensors, gas valves, inducer motors and control boards.
Heat pump repair
Reversing valves, defrost controls, refrigerant and outdoor fan problems.
Safety checks
Heat exchanger inspection and carbon monoxide test on gas furnaces.
Pricing
Typical heating repair prices
Common repairs and their usual ranges.
| Repair | Typical price |
|---|---|
| Diagnostic visit (waived with repair) | $89 |
| Flame sensor cleaning or replacement | $120 – $250 |
| Hot surface ignitor | $200 – $350 |
| Heat pump defrost control board | $300 – $600 |
| Inducer motor | $500 – $1,000 |
Example prices for this demo website. A real business would publish its own rates.
FAQ
Heating repair questions
Why is my heat pump blowing cold air?
In heating mode it may be in a normal defrost cycle for a few minutes. If it blows cold for longer, the reversing valve, refrigerant charge or thermostat setting may be the problem.
How often should a furnace be serviced?
Once a year, ideally in the fall before the first cold front. It is included in our maintenance plans.
Is a furnace or a heat pump better in Austin?
Heat pumps work very well in Central Texas because winters are mild. Many homes use a heat pump with a gas furnace as backup for the coldest days.
No heat tonight?
Call for 24/7 heating repair across Greater Austin.